<< go-around | go around | go overshoot >>
Back to: "G"
go around
- Definição1
- An instruction for a pilot to abandon the approach for landing and to climb away for a visual circuit pattern, or carry out a missed approach procedure, as appropriate. Additional instructions may follow. Unless otherwise advised by air traffic control (ATC), a VFR (visual flight rules) aircraft, or an aircraft conducting a visual approach, should overfly the runway while climbing to the traffic-pattern altitude and enter the traffic pattern via the crosswind leg. A pilot on a IFR (instrument flight rules) flight plan making an instrument approach should execute the published missed approach procedure or proceed as instructed by ATC (e.g., "Go around" [additional instructions if required]). Also called "Go overshoot".
- Fonte1
- KUMAR, Bharat (ed.). An illustrated dictionary of aviation. New York: McGraw-Hill, c2005. 752 p.
- Definição2
- This phase begins when the crew aborts the descent to the planned landing runway during the Approach phase, it ends after speed and configuration are established at a defined maneuvering altitude or to continue the climb for the purpose of cruise (same as end of “Initial Climb”).
- Fonte2
- INTERNATIONAL AIR TRANSPORT ASSOCIATION. Safety report 2014. Issued April 2015. 51st Edition.
- Fonte3
- INTERNATIONAL CIVIL AVIATION ORGANIZATION. Aircraft accident digest n.30. Montreal, 1986. (Cir. 196 AN/115).
- Nota adicional1
- Acronym in English: GOA.
- Contexto
- The instrument approach had 2-dot deviations in localizer and glide slope, and the visual approach involved a tight turn with a high sink rate. Even when the "unstabilized approach" was called out on the ILS, the second officer did not initiate a go-around, as prescribed in company procedures.
- Subárea1
- Piloting
- Related Term
- missed approach
- missed approach holding fix
- missed approach point
- missed approach procedure
- missed approach segment
- overshoot
- undershoot
- Variante
- go-around
- Português
- arremetida
- Imagem
