<< control area | control cables | control column >>
Back to: "C"
control cables
- Fonte1
- INTERNATIONAL CIVIL AVIATION ORGANIZATION. Unmanned aircraft systems (UAS). Montreal, 2011. (Cir. 328 AN/190).
- Fonte2
- INTERNATIONAL CIVIL AVIATION ORGANIZATION. Manual of aircraft accident and incident investigation. Part III: investigation. Montreal, 2011. (Doc. 9756 AN/965).
- Fonte3
- INTERNATIONAL CIVIL AVIATION ORGANIZATION. Manual of aircraft accident and incident investigation. Part III: investigation. Montreal, 2011. (Doc. 9756 AN/965).
- Nota Adicional1
- Freezing of control cables. In the Fall and early Spring, aircraft often operate in water conditions at or near the freezing point, and any water spray on the floats and tail surfaces of the aircraft may freeze. Apart from the ice increasing the weight of the aircraft, it disrupts the airflow over the flying surfaces, and may accumulate on and jam the water rudder cables or flight controls.
- Contexto
- The software and data/communications link provides functions as vital as traditional wiring, control cables and other essential systems. These links may utilize diverse hardware and software that may be provided and managed by third parties.
- The minimum amount of disassembly should be done. If it is necessary to disconnect bolted assemblies, a record should be made of the sequence of the various washers, spacers, nuts, etc. In many cases control cables will have to be cut to separate portions of the wreckage. When this is done, care should be taken to identify and tag all cuts.
- Français
- câble de commande