<< initial approach segment | initial climb | initial operating experience >>
Back to: "I"
initial climb
- Definição1
- Begins when the aircraft leaves the ground and an initial pitch attitude has been established to climb away from the takeoff area. Normally, it is considered complete when the aircraft has reached a safe maneuvering altitude, or an en route climb has been established.
- Fonte1
- FEDERAL AVIATION ADMINISTRATION. Aircraft flying handbook. Washington, 2004. Disponível em: http://www.faa.gov/library/manuals/aircraft/media/FAA-H-8083-5.pdf. Acesso em: 06 dez 2019.
- Definição2
- This phase begins at 35 feet above the runway elevation; it ends after the speed and configuration are established at a defined maneuvering altitude or to continue the climb for the purpose of cruise. It may also end by the crew initiating an “Approach” phase.
- Fonte2
- INTERNATIONAL AIR TRANSPORT ASSOCIATION. Safety report 2014. Issued April 2015. 51st Edition.
- Nota adicional1
- Maneuvering altitude is based upon such an altitude to safely maneuver the aircraft after an engine failure occurs, or predefined as an obstacle clearance altitude. Initial Climb includes such procedures applied to meet the requirements of noise abatement climb, or best angle/rate of climb.
- Subárea1
- Phase of Flight
- Use
- ICL